SKORR Glow

SKORR|GLOW is a medical-grade, multi-technology at-home device designed to tone, firm, brighten, and deeply treat your skin. It features6 advanced technologiesin one compact tool:radiofrequency, LED light therapy, microcurrent, microelectroporation, sonic vibration, and targeted eye/lip settings.

Unlike many devices that offer only one function, SKORR|GLOW combinessix synergistic technologiesfor comprehensive skin rejuvenation. It wasoriginally designed for in-office useand is now available for at-home treatments, making it one of the most effective skin tools on the market.

Use BOOST modeafter cleansing toenhance product absorptionwith microelectroporation and yellow LED light. Then follow withLIFT modefor toning, orBUILD modefor deeper collagen stimulation. Use theEYE/LIP modearound delicate areas. Always allow serums or boosters toabsorb for at least 10 minutesbetween steps.

• BOOST: Yellow LED + Microelectroporation → maximizes absorption, lymphatic drainage.
  
• LIFT: Green LED + Microcurrent → tightens and tones facial muscles.
  
• BUILD: Red LED + Radiofrequency + Sonic vibration → stimulates collagen & elastin, improves structure.
  
• EYE/LIP: RF + Sonic vibration → targets fine lines in delicate areas. 

Yes, SKORR|GLOW is safe for daily use, especially when paired with SKORR Hydrate + Glow Hyaluronic Acid Booster or SKORR Skin Revive Exosome EGF Booster, which are formulated to enhance results without irritation.

However, caution is needed when combining the device with highly active serums like vitamin C. If you’re using SKORR Anti-OX C+E Antioxidant Serum or other potent vitamin C formulas, start by using SKORR|GLOW with those serums just once per week to allow your skin to adjust and avoid sensitivity.

Over time, you can gradually increase frequency as tolerated—but always monitor your skin’s response.

A full-face session with SKORR|GLOW takes about 20 minutes, with each mode lasting 5 minutes. The device is pre-programmed for 4 distinct modes—BOOST, LIFT, BUILD, and EYE/LIP—making it easy to follow a consistent routine.

You can also customize your session based on your goals or time:

• A quick BOOST or LIFT only pass takes just 5 minutes to refresh and prep the skin.
  
• A full routine using BOOST + LIFT + BUILD + EYE/LIP takes 20 minutes for maximum results in tone, lift, and rejuvenation.

For best results, use SKORR|GLOW with SKORR boosters and serums specifically formulated for enhanced penetration and compatibility with the device’s technologies. We recommend starting with the Hyaluronic Acid Booster or the SKORR Skin Revive Exosome EGF Booster—both designed to hydrate, repair, and enhance results without irritation.

 Caution when using highly active serums:
If you’re incorporating potent actives like the SKORR Anti-OX C+E Antioxidant Serum (vitamin C) or similar formulations, we advise using SKORR|GLOW with them just once per week initially, to allow your skin to adapt and avoid potential sensitivity or irritation.

Over time, you can gradually increase frequency as tolerated—but always listen to your skin and adjust as needed.

 Avoid applying oil-based or heavy occlusive products before using the device, as they can block the delivery of technologies like microelectroporation or radiofrequency. These richer products should be applied after your SKORR|GLOW treatment.

 Lightweight, water-based serums are ideal for use with the device, especially those specifically developed for deep delivery and skin barrier support.

For those who are not currently undergoing in-office treatments, SKORR|GLOW is an excellent tool to maintain and enhance the overall health, tone, and glow of the skin. It delivers meaningful results through consistent at-home use—supporting collagen production, improving circulation, and enhancing product absorption.

For patients who do receive professional treatments, SKORR|GLOW serves as a powerful at-home extension—helping to amplify and prolong the benefits of procedures like microneedling, lasers, or radiofrequency.

While in-office equipment operates at higher intensities, SKORR|GLOW uses the same proven technologies—radiofrequency, LED light therapy, microcurrent, sonic vibration, and more—at lower, safe, over-the-counter energy levels designed for daily or weekly at-home use.

Whether used on its own or as a maintenance tool, SKORR|GLOW bridges the gap between office visits and home care, empowering you to take your skin health into your own hands.

Yes—SKORR|GLOW is suitable for all skin types, including sensitive or reactive skin. That said, it’s important to take a gentle, step-by-step approach when starting:

1. Begin with the lowest intensity setting to allow your skin to acclimate gradually.

2. Limit the number of passes over each area—1 to 2 passes per zone is plenty at the beginning.

3. Use only non-irritating, fragrance-free serums like the SKORR Hyaluronic Acid Booster or Skin Revive Exosome EGF Booster to soothe and support the skin barrier.

4. Make sure skin is properly prepped—cleanse with a gentle, non-stripping cleanser that won’t cause irritation before treatment.

5. If you experience any redness, warmth, or mild inflammation, this is usually transient and resolves quickly. Once resolved, resume use at the lowest setting, less frequently, and increase gradually as tolerated.

 Taking a slow and mindful approach ensures even the most sensitive skin can benefit safely from SKORR|GLOW’s advanced technologies.

Many users notice aninstant glow and liftafter the first use. Long-term benefits like improved texture, firmness, and radiance typically appear within3–4 weeksof consistent use at least 3-5 times a week.

Absolutely. SKORR|GLOW iscompact, cordless, and rechargeable, making it the perfect travel companion for glowing skin on the go.

First, make sure the device is fully charged and that the charging cable is securely connected. To power it on, you’ll need to press and hold the power button for at least 5 seconds—a quick tap won’t activate the device. 

If the device still isn’t responding, please consult the user manual for troubleshooting tips or reach out to us at info@skorrskin.com for further support. We’re happy to help!

Think of SKORR|GLOW as your skin’s personal trainer—different modes for different times of day.

 Morning Routine (AM)

• Start with BOOST mode to de-puff, awaken circulation, and enhance absorption of your antioxidants and serums.
  
• Follow with LIFT mode to sculpt the jawline, define cheekbones, and tone facial muscles before makeup or sunscreen.

  
 Evening Routine (PM)
  

• After cleansing, apply your treatment serum or retinol and use BUILD mode to deliver radiofrequency and sonic vibration, stimulating collagen while relaxing facial tension.
  
• Finish with EYE/LIP mode to target fine lines, crow’s feet, and vertical lip lines—perfect for overnight skin repair.

  
 Pro Tip: Treatments take just 10–15 minutes and can be customized depending on your skin’s needs each day.

Not at all! You can rotate modes based on your goals. For example:
   

• Daily BOOST for lymphatic drainage and skincare penetration.
  
• LIFT every morning for definition.
  
• BUILD 2–3x per week for deeper rejuvenation
  
• EYE/LIP as needed or nightly for anti-aging around delicate areas.

SKORR|GLOW is highly effective on its own, thanks to its combination of advanced technologies like radiofrequency, microcurrent, LED light, and microelectroporation. However, pairing it with the right skincare ingredients can further enhance the efficacy of both the device and your products.

Before Using SKORR|GLOW:

• Start with clean, dry skin—always use a gentle, non-irritating cleanser.
  
• Apply a light, water-based serum or booster, such as the SKORR Hyaluronic Acid Booster or Skin Revive Exosome EGF Booster. These are specifically formulated to work synergistically with SKORR|GLOW. 
• Avoid oil-based or heavy creams before treatment, as they can block the delivery of energy and reduce the impact of the device.
  

During Treatment:

• Start your treatment by applying an active serum tailored to your skin’s needs and desired outcome. Choose from SKORR Anti-OX C+E, SKORR Skin Calm, SKORR Niacinamide, or SKORR Skin Revive Exosome Booster depending on your skin’s needs. Immediately follow with BOOST mode to enhance product penetration and stimulate lymphatic drainage.
• Once the active serum has been delivered into the skin with a single pass, apply SKORR Hydrate + Glow, which acts as a conductive glide medium, allowing the device to move smoothly across the skin without tugging or dragging during BOOST and the subsequent modes.
• If the gel begins to feel sticky or stops gliding easily, apply more Hydrate + Glow or mist the skin with Avene Thermal Water to rehydrate the surface and restore smooth movement.
• After BOOST mode, proceed with LIFT, BUILD, or EYE/LIP modes, depending on your skin goals for the treatment session.

After Using SKORR|GLOW:

• Once you’ve completed your treatment, you can immediately follow with your next skincare steps—there’s no need to wait. Apply a moisturizer, barrier-repair cream, or sunscreen in the morning, or a nourishing night treatment in the evening to lock in hydration and support skin recovery. This final step helps seal in the benefits of the active ingredients delivered during your SKORR|GLOW session and keeps your skin protected and balanced.

By combining SKORR|GLOW with well-formulated, non-irritating skincare, you’re boosting the benefits of both—your products penetrate deeper, and the device stimulates the skin’s natural renewal processes more efficiently.

A Note on Active Ingredients:

You can use SKORR|GLOW in BOOST mode to enhance the penetration of active ingredients such as antioxidants, niacinamide, peptides, or retinol. Apply your chosen active serum first, then perform a single pass over the entire treatment area to gently infuse it into the skin. After that, switch to SKORR Hydrate + Glow serum to allow the device to glide smoothly and comfortably across the skin during the remainder of the treatment. If the serum begins to feel sticky or the device doesn’t glide easily, apply a bit more serum or mist the skin with Avene Thermal Water to rehydrate the surface and restore slip. Avoid using the device with oils or ointments, as they can block energy delivery and reduce the effectiveness of the treatment.

Yes! You can absolutelyspot-treatareas like the jawline, nasolabial folds, or forehead. The device is designed to be flexible—so whether you do a full routine or a 5-minute targeted lift, you’ll still see results.

Yes, but give your skin1–3 days to rest, depending on the treatment. Then, use SKORR|GLOW toextend results, boost hydration, and maintain skin tone between appointments.

Using SKORR|GLOW on skin that has makeup is contraindicated. The device should only be used on clean, freshly cleansed skin to avoid pushing makeup particles and impurities into the skin, which can lead to irritation and reduce treatment effectiveness.

For those who don’t get regular facials, SKORR|GLOW functions as an effective at-home facial, delivering visible results in tone, texture, and firmness using proven technologies like radiofrequency, LED, and microcurrent. It’s a powerful way to care for your skin consistently from home.

For those who do receive in-office treatments, SKORR|GLOW is the perfect complement—helping to extend, enhance, and maintain the benefits of professional procedures between visits. It keeps your skin glowing, lifted, and healthy every day, while supporting long-term results.